WINTWIRE
Stainless Steel Wire 416
416 stainless steel wire or 1.4005 has an inceased amount of sulphur which makes it a highly machinable stainless steel. The increased sulpher lowers the material corroision resistance properties. The material can be used in both its as manufactured condition or it can be harded and tempered to a high level.
| Wekstoff | C. | Si. | Mn. | P. | S. | Cr. | Ni. | Mo. | Cu. | N. | Ti. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EN 10088-3: 2005 | 1.4005 | 0.08 - 0.15 | 1.00 | 1.50 | 0.04 | 0.15 - 0.35 | 12.0 - 14.0 | 0.60 |
| Sizes | Round Wire | 0.10 – 12.00 mm dia. |
|---|---|---|
| Shaped Wire | Upto 45 mm2 area | |
| Flat Wire | Thinnest 0.15 mm | |
| Widest 12.00 mm |
| Available in four conditions | ||
|---|---|---|
| Condition 1: | Annealed | The material has been supplied in the fully softened |
| Condition 2: | Light Drawn | The material has been lightly drawn "skin passed" after annealing |
| Condition 3: | Hard Drawn | The material has been drawn hard with either a bright surface or a soap coated surface |
| Condition 4: | Specified Tensile | The material has been drawn to your desired tensile range |
Also known as
- 416
- 1.4005
- X12CrS13
- 416S21
Available in
- Round Wire
- Shaped Wire
Applications
- Screws
- Rivets
- Fasteners
- Machining
Packaging
- In Coil
- In Lengths
- On Formers
- On Spools