WINTWIRE
Stainless Steel Wire 316
316 stainless steel wire or 1.4401 contains an addition of molybdenum that gives the material an improved corrosion resistance. This is particularly apparent for pitting and crevice corrosion in chloride environments. The material has a higher carbon content than 1.4404 which often lends itself to spring making due to the higher cold work factor.
| Wekstoff | C. | Si. | Mn. | P. | S. | Cr. | Ni. | Mo. | Cu. | N. | Ti. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EN 10088-3: 2005 | 1.4401 | 0.07 | 1.00 | 2.00 | 0.045 | 0.015 | 16.5 - 18.5 | 10.0 - 13.0 | 2.00 - 3.00 | -- | 0.11 | -- |
| Sizes | Round Wire | 0.10 – 12.00 mm dia. |
|---|---|---|
| Shaped Wire | Upto 45 mm2 area | |
| Flat Wire | Thinnest 0.15 mm | |
| Widest 12.00 mm |
| Available in four conditions | ||
|---|---|---|
| Condition 1: | Annealed | The material has been supplied in the fully softened |
| Condition 2: | Light Drawn | The material has been lightly drawn "skin passed" after annealing |
| Condition 3: | Hard Drawn | The material has been drawn hard with either a bright surface or a soap coated surface |
| Condition 4: | Specified Tensile | The material has been drawn to your desired tensile range |
Also known as
- 316
- 1.4401
- X5CrNiMo17-12-2
Available in
- Round Wire
- Shaped Wire
Applications
- Wire Bending
- Springs
- House Protection
- Cables
- Fasteners
Packaging
- In Coil
- In Lengths
- On Formers
- On Spools