WINTWIRE
Titanium Grade 3
Titanium grade 3 wire is a commercially pure titanium grade offering higher strength than grades 1 and 2 while maintaining the corrosion resistance, weldability and useful ductility associated with the CP titanium family. Its increased oxygen content provides greater tensile and yield strength, making grade 3 suitable where grade 2 does not provide sufficient mechanical performance but the use of an alloyed titanium grade is unnecessary. It performs particularly well in chemical, marine and process-industry environments where both corrosion resistance and moderate strength are important. Grade 3 can also be supplied as welding wire under the ERTi-3 designation. For still higher strength within the commercially pure family, grade 4 is the natural progression.
| Werkstoff | Ti. | Fe. | O. | C. | N. | H. |
|---|---|---|---|---|---|---|
| 3.7055 | Bal. | 0.30 | 0.35 | 0.08 | 0.05 | 0.015 |
| Sizes | Round Wire | 0.10 – 20.00 mm dia. |
|---|---|---|
| Shaped Wire | Upto 45 mm2 area | |
| Flat Wire | Thinnest 0.15 mm | |
| Widest 12.00 mm |
| Available in four conditions | ||
|---|---|---|
| Condition 1: | Annealed | The material has been supplied in the fully softened |
| Condition 2: | Light Drawn | The material has been lightly drawn "skin passed" after annealing |
| Condition 3: | Hard Drawn | The material has been drawn hard with either a bright surface or a soap coated surface |
| Condition 4: | Specified Tensile | The material has been drawn to your desired tensile range |
Also known as
- 3.7055
- ERTi-3
- UNS R50550
- CP Titanium Grade 3
- GR3
Available in
- Round Wire
- Shaped Wire
Applications
- Chemical Processing
- Marine
- Pressure Equipment
- Heat Exchangers
- Aerospace Components
- Industrial Fabrication
Packaging
- In Coil
- In Lengths
- On Formers
- On Spools