WINTWIRE

Titanium Grade 2

Titanium grade 2 wire is the most widely used of the commercially pure titanium grades, combining excellent corrosion resistance with higher strength than grade 1 while retaining good ductility, formability and weldability. This balance makes grade 2 a versatile choice for components exposed to seawater, chlorides and many chemical processing environments, where long-term corrosion performance is required without moving to a higher-strength titanium alloy. It can be cold formed and welded readily and is widely specified as filler wire under the ERTi-2 designation. Grade 2 is often the starting point for general-purpose commercially pure titanium wire applications, with grade 1 preferred where maximum formability is required and grades 3 or 4 where greater strength is needed.

Werkstoff	Ti.	Fe.	O.	C.	N.	H.
3.7035	Bal.	0.30	0.25	0.08	0.03	0.015

Sizes	Round Wire	0.10 – 20.00 mm dia.
	Shaped Wire	Upto 45 mm2 area
	Flat Wire	Thinnest 0.15 mm
		Widest 12.00 mm

Available in four conditions
Condition 1:	Annealed	The material has been supplied in the fully softened
Condition 2:	Light Drawn	The material has been lightly drawn "skin passed" after annealing
Condition 3:	Hard Drawn	The material has been drawn hard with either a bright surface or a soap coated surface
Condition 4:	Specified Tensile	The material has been drawn to your desired tensile range

Packaging

• In Coil
• In Lengths
• On Formers
• On Spools